#Zebra designer 2 install#
#Zebra designer 2 driver#
#Zebra designer 2 software#

#Zebra designer 2 driver#

If your Zebra Eltron Thermal Printer is printing labels that are too light or faint, this is typically caused by an incorrect driver setting, and can easily be solved. If the solutions above do not solve your problem, please Contact Customer Support. If it is still upside-down, follow these steps once more and the issue should be resolved.

#Zebra designer 2 install#

Install a new copy of the printer driver by following the steps in this guide: Configuring the Zebra Eltron Printer Drivers.

To correct this problem, do the following:

The other cause of upside-down label printing is due a damaged or incompatible printer driver.

Click 'OK' and then print a sample of your label.

Within the 'Options' tab, change the 'Rotate 180°' setting by checking or unchecking it (see image below).

Right-click on the Zebra Eltron printer icon and select 'Printing Preferences'.

To correct this problem, please do the following:

Th e first cause of this issue is due to an incorrect setting in the printer's driver.

If your Zebra Eltron Thermal Printer is printing upside-down images on your labels, there are two reasons why this may be occurring: If this does not solve your problem, please Contact Customer Support. To correct this problem, we recommend installing a new copy of the printer driver by following the Installation and Setup guide. If your Zebra Eltron Thermal Printer is printing a solid black bar on your labels, this is typically caused by a damaged or incompatible printer driver. If the steps in this guide did not solve your problem, please Contact Customer Support.

#Zebra designer 2 software#

The latest version of the software improves compatibility with certain Zebra Eltron Thermal Printers. Once this is complete, try printing your label once more. If this did not solve your problem, please download and install the latest version of the software by clicking on this link: Software - Free Download.Go back to the software and select your label roll from the 'Printing On' or 'Print Media' dropdown menu (see image below).The printer will feed two labels and calibrate to the labels you are using. Select the 'Advanced Setup' tab, then click on the 'Calibrate' button in the lower-right corner (see image below).To solve this problem, you simply need to calibrate the printer. Of fset Printing and/or Multiple Labels Feeding at Once You should now be able to print using your Zebra Eltron Thermal Printer. Open the software and select your label roll from the 'Printing On' or 'Print Media' dropdown menu (see image below).Load your label roll and press the Advance button to move to the next whole label.

Make sure the size is set to width 4 and height 6.

Right-click on the Zebra Designer printer and select 'Printing Preferences'.

Open the Start Menu and select 'Devices and Printers', 'Printers', or 'Printers and Faxes'.

(Zebra GC420t) If you are installing the Zebra GC420t thermal printer, please follow the configuration steps in this guide.

Download and install the 'Zebra Designer' driver, available from the Zebra website.

Connect your printer to your computer using the USB, Serial, or Parallel cable and turn the printer on.

To setup your Zebra Eltron Thermal Printer so that you can print onto label rolls, follow these simple steps: Offset Printing and/or Multiple Labels Feeding at Once